By Jay / / Smartwatch

How to Update Your DZ09 Firmware: The Easy Step!

Remember : Updating a firmware without experience might lead to bricking your phone. I hope by reading this article, we assume that you already know the danger of updating your firmware without experience. Hopefully this article will be a help for you. 

What is DZ09 actually? well, for more information visit this page.

The most asked question when updating your firmware is, what kind of tools do you need? What do you need to do? Where can I download the latest firmware version? And so on. Well, worry not, in this article (for you guys, the DZ09 users), we will give you a brief guide on how to update your firmware and where to download the firmware version. Check it out

What do you need?

1. Laptop/PC (Your Choices)

2. An USB Cable

3. Flashtool

4. Firmware

There you go, that’s all you need to update your DZ09 firmware. Easy, right? First of all, I recommend backing up all your contacts to your Android smartphone before starting the firmware update because we might not know what will happen, right

Firmware

There are many types of firmware that can be downloaded from the internet, but the most useful one is, of course, the original DZ09 firmware itself, which can be downloaded HERE!

But of course, there are other firmware versions that can be downloaded, but most of them are not perfect. So, flash at your own risk:

img_20151218_100600

APLUS (Password Didn’t work)

img_20151218_100634

GT08 (Camera Trouble)

There are still much more firmware that could be downloaded from the web, but we will continue updating some of it in this article, so keep viewing this article for more information

Get Started

1. Dial *#8375# and write down the version info

2. Dial *#06# and Write down your IMEI number

First of all, you need your computer to recognize your DZ09 which could easily be done if you already have the driver installed in it. If you don’t then don’t worry, it comes with the flash tool that is can be downloaded in the link before. Install it then you are set to go.

Note: To check if your device is successfully recognised. So Go to the Memory Test tab and check the RAM test only after that Connect your Devices with your computer and let it run if you succeed then the green circle will pop up.

Next Step!

1. Power off your DZ09.

2. Open Flashtool.exe and go to the Download tab. Hit Download Agent and open MTK_AllInOne_DA.bin.

3. Hit Scatter/Config File and load the .cfg file inside the firmware folder.

4. Select Options, and make sure to tick “backup->Download/Format->Restore” on the Backup and Restore tab.

5. Hit the Download button.

6. Connect the USB cable to your device.

7. Wait for the backup, installation, and restore process to complete until the GREEN CIRCLE appears. It will take up to 5 minutes to complete all the processes.
Note: It is important not to disconnect your DZ09 from your computer as it may lead to bricking your phone.

8. Disconnect the USB cable.

9. Done.

It is not exactly hard to update your firmware, but it is duly noted that it is very risky to do so without experience. Thank you for reading and have a nice day.

Update DZ09 Firmware
About Jay
A Content writer for Roonby.com Contact me on [email protected], we can't reply to gmail for some reason.